Madison, MS · Est. 1996
Seamless Gutter Installation & Repair in Madison and Jackson, MS
Dun-Rite Seamless Gutters, Inc. is a gutter installer based in Madison, Mississippi. Since 1996, Mark Dungan's crew has formed seamless aluminum gutters on site, hand-soldered copper gutters, and repaired and cleaned gutters on homes and commercial buildings in 14 cities around Jackson.
- Formed on site to your roofline
- 25-year material warranty
- No travel fees in 14 cities
What We Do
What gutter work does Dun-Rite do around Madison and Jackson?
Dun-Rite Seamless Gutters, Inc. installs, repairs and cleans gutters. Its eight services cover new seamless aluminum and copper systems, guards, cleaning, repair, commercial buildings and downspouts, and each one links to a page with the prices, materials and steps for that job.
Seamless Gutter Installation
5-inch and 6-inch K-style aluminum gutters formed at your house from one coil, so no run has a joint in the middle.
- .032 gauge aluminum standard
- Hidden hangers every 24 inches
- Old gutters hauled away
Aluminum Gutters
Rust-proof aluminum in .032, .040 and .050 gauge, with nine stocked baked-enamel colors and custom colors on order.
- Nine colors in stock
- Three gauges available
- Will not rust
Copper Gutters
Copper gutters with every seam hand-soldered, in half-round, K-style and ogee profiles, plus standing-seam copper accents.
- Seams soldered, never riveted
- 16, 20 and 24 oz copper
- Awnings and dormer caps
Gutter Guards & Leaf Protection
Fine mesh for pine straw, large-hole screen for oak leaves, or foam inserts, fitted to new or existing gutters.
- Three guard types priced
- Fits gutters you have
- Most retrofits take hours
Gutter Cleaning
Debris removed by hand, every downspout flushed, and a written report with photos sent the same day.
- Hand-cleaned, not blown out
- Downspouts flushed clear
- Photo report after each visit
Gutter Repair & Replacement
Sagging runs, leaking corners and gutters pulled off the fascia repaired by the section, or the whole system replaced.
- Repairs priced per section
- Storm claim paperwork prepared
- Replacement when repair fails
Commercial Gutters
7-inch and 8-inch gutters and high-flow downspouts for offices, retail centers, multi-family and industrial buildings.
- 7-inch and 8-inch profiles
- One point of contact
- AIA billing on request
Custom Downspouts
Round, 3x4 and 4x5 downspouts sized to the roof area they drain, with underground drain tie-ins where the yard needs them.
- Sized to roof area
- Round and rectangular profiles
- Underground tie-ins available
Typical prices
How much do gutters cost in central Mississippi?
A complete seamless aluminum gutter system from Dun-Rite Seamless Gutters, Inc. runs $1,200 to $3,500 on most Mississippi homes. Copper is priced by the foot, and cleaning, guards and repairs are priced by the visit, the foot or the section. The table lists each range; your written quote follows an on-site measurement.
| Job | Typical price | Priced by | Good to know |
|---|---|---|---|
| Seamless aluminum gutters | $1,200 – $3,500 | Whole home | .032 gauge, 5-inch or 6-inch K-style; old gutters removed |
| Copper gutters | $25 – $40 | Linear foot, installed | A 200-foot home runs about $5,000 – $8,000 |
| Gutter guards | $3 – $14 | Linear foot, installed | Foam at the low end, fine mesh at the high end |
| Gutter cleaning | $150 – $300 | Visit | Recurring plans are 15–25% less per visit |
| Gutter repair | $150 – $600 | Section | Full replacement starts at $1,200 |
| Underground drain tie-in | $300 – $800 | Drainage run | Depends on length and how hard the trench is to dig |
The Dun-Rite process
How does a Dun-Rite gutter job go, start to finish?
A Dun-Rite gutter job has four steps: an on-site estimate, forming the gutters at your house, hanging them, and hauling the old ones away. Mark Dungan personally inspects every estimate, and most single-story homes are finished in one day.
- On-site estimateThe roofline is measured, the water-flow needs of the roof are evaluated, and you get a written quote. The estimate is free and carries no obligation.
- Formed at your houseEach section is formed on site with truck-mounted equipment to match your roofline, so there is no joint mid-run.
- Hung and pitchedHidden hangers go in every 24 inches, corners are sealed inside and out, and each run falls a quarter inch per 10 feet toward its downspout.
- Old gutters removedRemoval and disposal of the old system is part of every quote, and the finished job is covered by the material and labor warranties.
Signature work
Why do people call Dun-Rite for copper gutters?
Dun-Rite Seamless Gutters, Inc. hand-solders every copper seam with lead-free tin solder instead of riveting or caulking it. Copper has been the company's specialty since 1996, on luxury homes, historic properties and commercial estates across central Mississippi.
Copper runs $25 to $40 per linear foot installed and comes in 16, 20 and 24 ounce stock. It starts bright, bronzes within two or three years and reaches the green verdigris most people picture after ten to fifteen.
From the job file
What does Dun-Rite's finished work look like?
These are job snapshots from Dun-Rite Seamless Gutters, Inc.: dark and bronze gutters on brick and stucco homes, downspouts on two-story walls, and copper awnings over windows. Each caption says only what the photo shows, and the photos are small because they are phone snapshots.
Dark downspout at a covered-porch corner 
Dark gutters over a second-floor balcony 
Copper awnings and downspout on brick 
Downspouts on a two-story brick wall 
Dark gutter above a screened porch 
Two-story home with columns and arches 
Porch gutters on a dormered home, in snow 
Porch roofline below two dormers
Who you are hiring
Who is behind Dun-Rite Seamless Gutters?
Mark Dungan founded Dun-Rite Seamless Gutters, Inc. in Madison, Mississippi in 1996 and still supervises every commercial installation himself. The company is a Mississippi-licensed corporation that carries Workers' Compensation and General Liability insurance.
- BBB accredited, with a public BBB profile
- HomeAdvisor approved
- Member of the Home Builders Association
Mark Dungan
Founder and owner. Mark personally inspects every estimate.
Service area
Which cities does Dun-Rite serve?
Dun-Rite Seamless Gutters, Inc. serves 14 cities within roughly 30 miles of its Madison office, across Madison, Hinds and Rankin counties. There are no travel fees, fuel surcharges or trip charges anywhere inside that area.
- Gutters in Madison
- Gutters in Ridgeland
- Gutters in Gluckstadt
- Gutters in Canton
- Gutters in Jackson
- Gutters in Clinton
- Gutters in Raymond
- Gutters in Bolton
- Gutters in Terry
- Gutters in Flowood
- Gutters in Pearl
- Gutters in Brandon
- Gutters in Richland
- Gutters in Florence
Not sure whether your address is covered? The service area page has a town checker and a note on each city.
Common questions
What do homeowners ask Dun-Rite before hiring?
Homeowners mostly ask Dun-Rite Seamless Gutters, Inc. about price, timing, cleaning schedules and the warranty. The answers below are the ones the company gives; the full gutter FAQ covers materials and service areas in more detail.
How much do new seamless gutters cost in Mississippi?
Most homes Dun-Rite quotes fall between $1,200 and $3,500 for a complete seamless aluminum system. The figure moves with the linear footage, the number of stories and how many downspouts the roof needs. Removal and disposal of the old gutters is included in the quote.
Is Dunrite Gutters the same company as Dun-Rite Seamless Gutters, Inc.?
Yes. People search for the company as Dunrite Gutters, Dun-Rite Gutters and Dun Rite Seamless Gutters. They are all the same business: Dun-Rite Seamless Gutters, Inc., founded by Mark Dungan in 1996 and based at 115 Cherrybrook Dr in Madison, Mississippi.
What is the difference between seamless and sectional gutters?
Sectional gutters are sold in 10-foot pieces, so a 40-foot roofline has three joints that can open up and leak. A seamless gutter is one continuous piece per run, formed at your house from a coil of aluminum, with joints only at the corners and outlets.
How long does a gutter installation take?
Most single-story homes are finished in one day. Two-story homes and complicated rooflines take one to two days. Dun-Rite watches the forecast and moves the date for lightning or sustained rain; light drizzle does not stop an install.
How often should gutters be cleaned around Jackson?
Twice a year suits most central Mississippi homes: once in late spring after the pollen and oak catkins drop, and once in fall after the leaves come down. Lots under heavy tree canopy may need a visit every quarter.
What warranty comes with a Dun-Rite installation?
Every installation carries a 25-year manufacturer warranty on materials and a 2-year labor warranty from Dun-Rite on the workmanship.
Does Dun-Rite offer financing?
No. Dun-Rite does not offer in-house financing. Major credit cards are accepted, and larger commercial projects are billed on standard contractor terms.
Get a written gutter quote from Mark's crew
Call (601) 750-1800 or send the form. The office answers Mon–Fri 8 AM – 5 PM · Sat–Sun Closed, and most estimate visits are scheduled within 48 hours.